This Slimsport Roof Rack Tray neatly hugs the roofline of the Toyota Land Cruiser 100 Series, thereby keeping wind noise to an absolute minimum. The strong aluminum slats have top and bottom T-slots for fitting sports, camping and overlanding accessories.
KSTL003T - Toyota Land Cruiser 100 Series Slimsport Roof Rack Kit / Light Bar Ready Consisting of:1x KSTL001 - Toyota Landcruiser 100 series Slimsport Tray1x RRAC282 - Toyota Lnd Crusr 100 series Slmsprt 40'' lgt Bar W1x RRAC971 - Protection Strip Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 36.99kg (81.55lbs) Assembled Rack Kit Dimensions:2261mm (89'') L x 1292mm (50.9'') W x 133mm (5.2'') H The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4''-2.8'') to the highest point of your roof. Shipping Dimensions:Width: 325mm (13'')Length: 1700mm (67'')Height: 225mm (9'') Shipping Weight:Weight: 39kg (86lbs)
This low-profile flat deck Slimsport rack has a load-carrying area of 2280mm (89.8'') x 1289mm (50.7''). The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories. Easily add on the RRAC182 for most Front Runner side mount accessories (sold separately). Included in the RRAC282 has a 40'' cutout to allow the use of the Front Runner 40” LED Slim Light Bar LIGH213 (sold separately). Fitment guide and all mounting hardware included. Note: Drilling required for installation. Note: Under Rack Tables and some side mount accessories such as JADA010 and RRAC103 are not compatible with the Slimsport rack kit range. * Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Ficha informativa
- Categoria
- RACKS
Referências específicas
- MPN
- KSTL003T
Envios e devoluções
Aceitamos devoluções nas seguintes condições, caso cumpra com as condições de venda
- Cole a etiqueta numa superfície plana da embalagem
- Certifique-se de que os códigos de barras 1D e 2D estão claramente visíveis
- Garanta que a etiqueta está lisa, sem dobras ou vincos
- Verifique se não há rasgos, amassados, furos ou riscos
- Embale o produto de forma firme, utilizando a embalagem de tamanho adequado
- Assegure-se de que ambos os códigos de barras estão numa superfície plana da embalagem