Conquer any trail, day or night, with the Ford Ranger Slimsport Roof Rack Kit. Its sleek design ensures quiet performance. An integrated 40-inch light bar cutout and a wide range of accessories allow you to customize your setup for every adventure.
KSFR010T - Ford Ranger T6.2 Wildtrak Raptor Double Cab (2022-Current) Slimsport Roof Rack Kit / Light Bar ReadyConsisting of:1x KSFR007 - Ford Ranger T6.2(22+)/VW Amarok(23+)DC Ssport Tray1x RRAC377 - Ford Ranger T6.2 (22-Curr) VW Amarok (23-Curr) SSMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelAssembled Rack Dimensions:1272mm (50'') L x 1166mm (45.9'') W x 157mm (6.2'') Approximate Installed Weight: 27kg (59.52lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4''-2.8'') to the highest point of your roof.Shipping Dimensions:Width: 325mm (13'')Length: 1700mm (67'')Height: 220mm (9'')Shipping Weight:Weight: 27kg (59lbs)
This low-profile flat deck Slimsport rack has a load carrying area of 1272mm (50'') L x 1166mm (45.9'') W. The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have T-slots suitable for all Front Runner Dometic top mount accessories. Easily add on the RRAC182 for most Front Runner Dometic side mount accessories (sold separately). The RRAC377 has a 40'' cutout to allow the use of the LIGH213 (sold separately). Drilling required. Note: Under Rack Tables and some side mount accessories such as JADA010 and RRAC103 are not compatible with the Slimsport rack kit range. Note: Only compatible with rear factory antenna or when no front antenna is fitted. All Front Runner Dometic Racks are backed by a Limited Lifetime Warranty*
Ficha informativa
- Categoria
- RACKS
Referências específicas
- MPN
- KSFR010T
Envios e devoluções
Aceitamos devoluções nas seguintes condições, caso cumpra com as condições de venda
- Cole a etiqueta numa superfície plana da embalagem
- Certifique-se de que os códigos de barras 1D e 2D estão claramente visíveis
- Garanta que a etiqueta está lisa, sem dobras ou vincos
- Verifique se não há rasgos, amassados, furos ou riscos
- Embale o produto de forma firme, utilizando a embalagem de tamanho adequado
- Assegure-se de que ambos os códigos de barras estão numa superfície plana da embalagem