Nissan Navara (2014-Current) EGR RollTrac Load Bed Kit de barras de tejadilho: sistema de transporte para tejadilho pensado para aumenta a capacidade de transporte do veículo, permite organizar equipamento no tejadilho e base versátil para acessórios de viagem. Compatível com Nissan Navara.
Principais vantagens
- Integra-se com soluções de transporte no tejadilho
- Concebido para uma instalação segura e funcional
- Adequado a viagens, campismo e utilização outdoor
- Solução pensada para utilização todo-o-terreno
Descrição detalhada
A set of Pickup Bed Load Bars used to transport gear over the bed of your Nissan Navara when fitted with an EGR RollTrac roll cover. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1475mm Load Bars that fit into the EGR RollTrac cover tracks, and fitting instructions. The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the EGR RollTrac cover tracks. Allows for gear to be mounted above the pickup’s load bed. The load bed retains its load-carrying ability, while the drop-down door functions as usual. Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Made from stainless steel and a durable, weather-resistant black powder coated aluminum. Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle. Note: If your Roll Top extrusion has a 6mm (0.24'') to 7mm (0.28'') slot opening, you may need RRAC962 for installation. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. * Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Especificações técnicas
| Marca | Front Runner |
|---|
| Referência | KRRT009 |
|---|
| Largura | 1590.0 mm |
|---|
| Altura | 160.0 mm |
|---|
| Profundidade | 160.0 mm |
|---|
| Peso | 8.40 kg |
|---|
| Categoria | Barras de tejadilho |
|---|
| Marca do veículo | Nissan |
|---|
| Modelo do veículo | Navara |
|---|
| Peso indicado pelo fabricante | 8.54kg (18.83lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6'')Length: 1590mm (63'')Height: 160mm (6'')Shipping Weight:Weight: 8.4kg (18lbs) |
|---|
Marca: Front Runner | Referência: KRRT009
Transações Seguras
CTT Expresso
Devoluções
