Jeep Wrangler JLU (2018-Current) 3/4 Slimline II Kit de grade de tejadilho: sistema de transporte para tejadilho pensado para aumenta a capacidade de transporte do veículo, permite organizar equipamento no tejadilho e base versátil para acessórios de viagem. Compatível com Jeep Wrangler.
Principais vantagens
- Integra-se com soluções de transporte no tejadilho
- Concebido para uma instalação segura e funcional
- Adequado a viagens, campismo e utilização outdoor
- Solução pensada para utilização todo-o-terreno
Descrição detalhada
This Slimline II 3/4 rack kit contains all the components needed to mount install the Slimline II cargo carrying rack to a Jeep Wrangler JLU including the Slimline II tray (1425mm x 1560mm), the Jeep JLU Extreme Mounting System and a Wind Deflector. Drilling is required for installation. The JLU Extreme mounting system bolts to existing mounting points on the chassis and internal roll cage. This unobtrusive, high performance, nearly indestructible mounting solution allows you to quickly remove the Freedom Panels with the rack in place. The windscreen can also be lowered without any interference. The cargo weight is evenly distributed across the vehicle roll bars bypassing the roof, placing zero weight on the hard top itself. All Front Runner Rack Kits contain installation instructions as well as all the components and hardware needed to mount the Slimline II Tray to your vehicle. These Foot Rails allow for a Dometic Front Runner Series under rack mount table (1 smaller TBRA018 or 1 larger TBRA017, TBRA051) to be fitted. All Dometic Front Runner Series Racks are backed by a Limited Lifetime Warranty* For further information on installation, please see the fitment instructions in the INSTALL tab.Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Dometic Front Runner Series Roof Rack or Load Bar kit.
Especificações técnicas
| Marca | Front Runner |
|---|
| Referência | KRJW041T |
|---|
| Largura | 1730.0 mm |
|---|
| Altura | 510.0 mm |
|---|
| Profundidade | 245.0 mm |
|---|
| Peso | 37.20 kg |
|---|
| Categoria | Grades de tejadilho |
|---|
| Marca do veículo | Jeep |
|---|
| Modelo do veículo | Wrangler |
|---|
| Peso indicado pelo fabricante | 37.23kg (82.08lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 510mm (20'')Length: 1730mm (68'')Height: 245mm (10'')Shipping Weight:Weight: 37.23kg (82lbs) |
|---|
Marca: Front Runner | Referência: KRJW041T
Transações Seguras
CTT Expresso
Devoluções
